Stone slab sizes and thickness

Slab dimensions decide how a benchtop is laid out, how many joins it needs and what your fabricator can template. This guide sets out the sizes and thicknesses MAMO actually stocks across sintered stone, natural stone and terrazzo — the figures below are read from our live range, not a generic table.

MAMO supplies and delivers full slabs. Cutting, fabrication and installation are carried out by your own stonemason.

Thickness by material

Counts are the number of products in each material currently listed at that thickness. Some products quote more than one thickness.

Material6mm9mm12mm18mm20mm30mm
Sintered stone7123—3—
Natural stone———6713
Terrazzo————14—

Slab formats we stock

Sintered stone

  • 3200 x 1600 x 12mm — 23 products
  • 2700 x 1200 x 6mm — 6 products
  • 3200 x 1600 x 20mm — 3 products
  • 2700 x 900 x 9mm

Manufactured to consistent slab dimensions, so formats repeat across the range. Non-porous, never needs sealing, and UV-stable for outdoor use.

Natural stone

  • 2600 x 1500 x 20mm
  • 3100 x 1800 x 18mm
  • 2950 x 1580 x 20mm
  • 2160 x 1590 x 20mm

Cut from quarried blocks, so every slab is a one-off — dimensions vary slab to slab. Always check the specification of the actual slab before you specify.

Terrazzo

  • 2400 x 1600 x 20mm — 12 products
  • 3200 x 1600 x 20mm — 3 products

Cast to set slab formats. Suits benchtops, splashbacks, floors and feature walls.

Choosing a thickness

6mm

The lightest format in the range, stocked in sintered stone at 2700 x 1200mm. Its low weight makes it a common choice for walls, splashbacks and cladding rather than benchtops.

12mm

The most common sintered stone thickness in MAMO's range, usually in the 3200 x 1600mm format. The large format means fewer joins across a long run of benchtop or a full-height wall.

20mm

The standard for natural stone and terrazzo, and available in sintered stone. It gives the most substantial edge without any build-up. If you want a thicker edge than the slab itself, your fabricator can mitre and build up the visible profile.

Common questions

What is the standard stone slab size in Australia?

There is no single standard — it depends on the material. Sintered stone is manufactured to consistent formats, most commonly 3200 x 1600mm, with a thinner 2700 x 1200mm format also available. Terrazzo is cast to set formats, typically 2400 x 1600mm. Natural stone is cut from quarried blocks, so each slab is a one-off and dimensions vary.

What thickness do stone benchtops come in?

Across MAMO's range, sintered stone is mostly 12mm with 6mm and 20mm also stocked, while natural stone and terrazzo are predominantly 20mm. Thicker slabs read as more substantial; thinner slabs are lighter to handle and are often chosen for walls, splashbacks and cladding. Your stonemason can also build up a thicker visible edge from a thinner slab.

What is the difference between 6mm, 12mm and 20mm stone?

It is a trade-off between weight and substance. 6mm sintered slabs are the lightest and are typically used on walls, splashbacks and cladding. 12mm is the most common sintered benchtop thickness. 20mm is the standard for natural stone and terrazzo and gives the most substantial edge profile. The right choice depends on the application and on what your fabricator recommends for the span.

Does MAMO cut slabs to size?

No — MAMO is a slab supplier. We supply and deliver the full slab; cutting, fabrication and installation are carried out by your own stonemason or fabricator, who will template to your job.

How do I check the exact size of a slab?

Every product page lists the slab specification for that material. For natural stone, where each slab differs, contact us or visit a showroom in Moorebank or Warners Bay to view and measure the actual slab before you commit.

See it in person

Order samples, or visit a MAMO showroom in Moorebank or Warners Bay to view and measure full slabs before you specify.